USA - EN
Canada - ENDIY with DAP Blog
Record Console and Minibar
- Tools
- Speed Square
- Hammer
- Measuring Tape
- Cordless Drill
- Kreg Jig
- Brad Nailer
- Circular Saw or Table Saw
- Miter Saw
- Jigsaw
- Self-Centering Dowel Jig
- Concealed Hinge Jig
- 35mm Forstner drill bit
- 3/8″ drill bit
- Materials
- Weldwood Original Wood Glue
- RapidFuse All Purpose Adhesive
- Weldwood Contact Cement Spray Adhesive
- (1) 4′ x 8′ x 3/4″ plywood sheet
- (1) 4′ x 4′ x 1/8″ hardboard sheet
- (1) 2′ x 4′ x 3/4″ MDF sheet
- (2) 1 x 2 x 96″
- (1) 1 x 3 x 72″
- (4) 6″ furniture feet
- (1) 1/4″ x 1/4″ x 48″ square brass rod
- (2) pair of Full Overlay Concealed Hinges
- (2) pair of Inset Concealed Hinges
- (1) 2′ x 4′ x 1/4″ Sheet of “sewing foam”
- 5/8″ 18 gauge brad nails
- 5/8″ 18 gauge brad nails
- 1-1/4″ Pocket hole screws
- 3/8″ x 1-1/2″ wood dowels
Here at DAP, we love seeing the creative projects our partners design! Elisha from Pneumatic Addict combined two ideas into one console that contains both a record player and minibar.
Even better, she includes the free plans and a step-by-step guide here.
Products
Featured
#DIYwithDAP
on Social
Click on the posts below!