DIY with DAP Blog
DIY Trestle Entry Table

- Tools
- 220 Grit Sandpaper
- Orbital Sander
- Drill/Impact Driver
- Miter Saw
- Table Saw
- Brad Nailer
- Kreg Jig
- Materials
- RapidFuse All Purpose Adhesive
- Weldwood Wood Glue
- Plastic Wood-X Wood Filler
- 2 – 2×8 boards @ 8’ long
- 3 – 1×6 boards @ 8’ long
- 1 1/4” brad nails
- 2 1/2” pocket screws
- 2 1/2” wood screws
Looking for the newest addition to your entryway? Check out the build for this DIY Trestle Entry Table.
You can find the step-by-step directions for this build here.