DIY with DAP Blog
DIY Kids Desk

- Tools
- Kreg Pocket Hole Jig
- Drill/Driver
- Circular Saw/Table Saw
- Miter Saw
- Jig Saw
- Brad Nailer or Pin Nailer
- Tape Measure
- Pencil
- Safety Glasses
- Hearing Protection
- Materials
- 3/4” x 4’ x 8’ Plywood Sheet
- 1 x 4 x 8’ Board
- 2 x 6 x 8’ Board
- 1-1/4” Pocket Screws
- 2-1/2″ Pocket Screws
- 1-1/2” Brad Nails or Pin Nails
- 2” Trim Screws
- DAP Weldwood Wood Glue
- Drawer Glides
With so many kids attending school virtually these days, now might be the perfect time to upgrade their desk setup. Check out these plans from Rogue Engineer to build a new desk complete with a hutch for storage or decor!