Eclipse Wall Repair Patch Technical Data Sheet
Technical Data Sheet


After applying the patch, you can paint it right away without waiting for it to dry. This feature significantly speeds up your repair process and ensures a smooth, professional finish.
Finish Project Faster: Paint Immediately & finish in minutes
This patch requires no drying time, eliminating the need for sanding or excess cleanup, making it the perfect solution for busy projects.
Superior Impact Resistance: 2x Stronger than drywall
Complete Drywall Repair in One Step: Apply, Paint, and Achieve a Seamless Finish
Provides a flawless finish that seamlessly blends with surrounding surfaces, ensuring no visible patch marks once painted over. Perfect for both minor and major drywall repairs.
Whether repairing damaged walls or ceilings, this versatile patch is suitable for all drywall surfaces, making it ideal for a variety of applications.
No Spackling, Sanding or Tools Required
Eclipse Rapid Wall Repair Patches, the ultimate solution for instant drywall fixes. No waiting, no mess – patch and paint immediately for a durable, impact-resistant finish. Perfect for permanent repairs on damaged walls and ceilings, this innovative solution eliminates the need for drying time and messy sanding. With DAP Eclipse, complete your projects faster with a long-lasting, mess-free solution that offers superior impact resistance.
Use the gray center circle of the patch as a guide to align over the center of the damage. Be sure the damaged area does not exceed the gray area.
Patch may be noticeable and visible until it has completely dried. As it dries, it will continue to improve its appearance with the surrounding drywall
Per paint manufacturer instructions it could take up to 4 weeks for paint to fully cure.
Press firmly to smooth around the outer edges of the patch to ensure proper adhesion to the surrounding drywall. Only press where the patch is in contact with the drywall. Do not push through the damaged area.
If repairing textured walls or ceilings, remove the protective layer by pulling the pop-up tab immediately after applying the patch to the drywall (no need to apply the first coat of paint). Apply texture, using aerosol spray or a tectured paint roller. Allow to dry thoroughly, then apply two additional coats of paint to complete your project.
Apply a generous amount of paint with each coat to ensure paint covergae. Always use a paint roller - using a paint brush is not recommended as it can leave brush strokes and won't provide the best coverage.
Patch may take longer to fully dry than surrounding drywall
The patch can be cut and customized to different shapes and sizes to fit certain applications such as in corners, along trim and molding, or for outlet applications. When cutting with scissors or a utility knife, make sure the tab is still fully intact so you an remove the protective layer.
Pull the pop-up tab up and away from the drywall towards yourself in order to release the protective layer from the patch. If the protective layer does not completely come off in one piece, use your fingernail to remove the rest of the protective layer prior to applying the next coat of paint.
For additional structural integirty, apply spackling to the damaged area, then apply the patch immediately over the damage. There's no need to wait for the compound to dry prior to applying the patch. Be sure the surrounding drywall is clean and free of material prior to applying the patch to ensure proper adhesion.
It's recommended to de-gloss the damage and surrounding drywall using sandpaper to help achieve a smooth surface and increase adhesion. Ensure the surface is smooth, dry and free of any debris and jagged edges prior to applying the patch
Time to complete the entire repair will vary based on the environment (temperature and humidity) as well as the paint brand being used for the repair. Time to complete the repair takes approximately 30 minutes with prepping the surface, applying the patch and painting the first coat while the protective layer is still on. Wait time is solely based on the time it takes for the paint to dry before applying another coat.
Yes, the patch can be cut and customized to different shapes and sizes to fit certain applications such as corners, along trim and molding or for outlet applications. However, cutting the patches outer edges to fit a smaller size repair is not recommended as you will lose the feathered edge and gradient which will effect the overall appearance.
We do not recommend using a heat gun to accelerate the paint dry time as heat guns get too hot and may damage the paint or the patch itself. However, a hair dryer, on a cool, low setting at a safe distance from the wall could be used to accelerate the dry time of the paint without interfering with the completed repair.
We do not recommend applying patches on top of one another to help cover a larger area of damage. For best results, use the recommended patch damage guidelines and choose the patch size that is sufficient for your repair. If your damage exceed 3” in diameter, you may want to utilize a different repair method.
Yes, you can clean the repaired patched surface, however, we recommend waiting to clean the surface until after the paint has finished drying (up to 4 weeks based on paint manufacturer recommendations). We also recommend when cleaning the repaired surface that you use mild soap & water.
We recommend waiting until the drywall surrounding the patch is fully dry (approx. 15-30 minutes depending on temperature and humidity conditions) before removing the top protective layer. However, you can wait hours or even days to remove the protective layer if you are not going to apply the final two coats of paint immediately.
Based on paint manufacturer recommendations, paint may not be fully cure up to 4 weeks after application. Waiting the full 4 weeks, although may not be necessary, may be ideal prior to exposing to impact or cleaning to confirm the patch and paint adhesion is fully dry. User will also notice an increase in the invisibility and blending of the repair into the surrounding drywall as the paint completely dries.
The unique benefit of DAP Eclipse patches is that you do not need to use drywall mud or spackling to complete the repair. We do not recommend using joint compound or spackling over top of the patch as it may not provide acceptable finished results. However, DAP Eclipse is compatible with aerosol spray textures and textured rollers to complete a texture wall repair.
The Eclipse patches help you achieve an exponentially better repair than other products on the market. Once damage is caused, your walls will never be the same no matter what product your using to repair the damage. The design of the patch does an excellent job of hiding the outline of the patch and providing a superior finished appearance. The first coat of paint prior to removing the protective layer with the pop-up tab allows the paint to fill in around the outer edges of the patch so that after your additional finishing coats are applied, it’s smooth and even with the surrounding drywall.
Until the first coat of paint is applied, dried and you remove the protective layer, the patch will be highly visible. Once the protective layer is removed and your additional coats of paint are applied, you will notice a significant difference in the visibility of the patched area as it will blend in smoothly and evenly with the surrounding drywall making a highly invisible repair. You’ll also notice improved finished appearance as the paint continues to fully cure (up to 4 weeks based on paint manufacturer cure times).
Yes, the patch accepts both latex and oil-based paints.
Prepping the surface is a crucial step in the application process. Since you won’t be applying spackling to help hid imperfections, you need to make sure those imperfections are taken care of prior to applying the patch. The surface should be as smooth, dry and free of any blemishes or debris as possible. We also recommend sanding the drywall surface prior to applying the patch to de-gloss the surface and increase adhesion.
Sanding the patch down using sandpaper is not recommended and may not provide acceptable finished results. We do recommend sanding the drywall prior to applying the patch to de-gloss the surface to promote and increase adhesion.
Yes, you can nail or screw back into the patch as long as there is drywall directly behind the patch where the nail or screw is placed.
For best results, we recommend using DAP Eclipse on dry drywall. If you happen to have damp or wet drywall, we recommend completing a full drywall replacement to ensure no mold or mildew starts to grow.
DAP Eclipse is specifically designed to repair drywall damage. At this time, we only recommend using this product for drywall applications.
Yes, you can apply spackling or drywall mud behind the patch prior to adhering the patch to provide additional support to your repair. You do not need to wait for the compound to dry prior to applying the patch, however, ensure the surrounding drywall is clean and free of material prior to applying the patch to ensure proper adhesion.
We recommend pulling the tab up and away from the drywall towards yourself in order to release the protective layer from the patch. If the protective layer does not completely come off in one piece, use your fingernail to remove the rest of the protective layer prior to applying the next coat of paint.
We recommend always using a paint roller. Using a paint brush is not recommended as it can leave brush strokes and won’t provide the best coverage.
Yes, this product is perfect for repairing damage in drywall walls and ceilings
Once the patch is adhered to the drywall surface, we do not recommend removing and repositioning. This will significantly impact the patch adhesion to the drywall and may not provide acceptable, permanent, long-lasting results. To help position the patch properly on the first try, use the gray center circle of the patch as a guide to align over the center of the damage. Be sure the damaged area does not exceed the gray area.
Currently, we do not recommend using DAP Eclipse Patches for exterior applications. It is recommended to only use for interior drywall walls and ceilings.
Yes, you can repair a textured wall using DAP Eclipse Patches. The product is compatible with aerosol spray textures and textured rollers. If repairing textured walls or ceilings, remove the protective layer by pulling the pop-up tab immediately after adhering the patch to the drywall (no need to apply the first coat of paint). Then apply texture, allow to dry thoroughly, then paint.