POWER POINT 230 Safety Data Sheet
Safety Data Sheet
POWER POINT 230 Advanced Elastomeric Acrylic Latex Sealant
1 / 3
1 / 3
FEATURES & BENEFITS
Cures to form a durable, waterproof seal that can help limit moisture exposure in properly prepared joints and gaps.
Once cured, the sealant helps resist mold and mildew growth in typical interior and exterior environments.
Designed with a low-odor formulation, making it suitable for use in interior spaces.
Formulated for a wide range of interior and exterior caulking and sealing applications.
Becomes paintable in just 30 minutes, helping support efficient project workflows.
Provides excellent adhesion and flexibility to help accommodate joint movement and resist cracking.
Acrylic latex formulation applies smoothly and tools cleanly across varied climate conditions.
Exceeds ASTM C920, Class 12.5 requirements and is VOC compliant, supporting reliable application and finish quality.
DESCRIPTION
POWER POINT 230 Advanced Elastomeric Acrylic Latex Sealant is a premium-grade sealant formulated for a wide range of interior and exterior applications. Its elastomeric formula enhances flexibility and adhesion, supporting joint movement and resistance to cracking over time. As it cures, the formula creates a durable, waterproof seal that can help limit moisture exposure and resists mold and mildew in properly prepared joints and gaps. The caulk is easy to apply, paintable in just 30 minutes, low in odor and cleans up with water. It is designed to help minimize shine-through or paint discoloration for consistent results. It is also VOC compliant and exceeds ASTM C920, Class 12.5 standards, supporting dependable application and finish quality. Adhering to many common building materials, Power Point 230 is suitable for sealing around windows, doors, siding, trim, molding, pipes, and more.
Proper Surface Preparation is Key
Remove any old caulk from the seam or joint by cutting or scraping it away. Then clean the area with soap and water to remove dirt, dust, grease or debris. Rinse thoroughly. Make sure the area to be sealed is clean and dry to ensure good adhesion.
Want straight lines?
Apply painter’s masking tape to either side of the joint before applying the sealant. Remove the tape before the sealant skins over – about 2-5 minutes. To remove, lift the edge up at a 45° angle and pull away from you.
Get a Professional-Looking Finish
To get a professional-looking finish after the sealant has been applied, smooth the bead of sealant with a caulk finishing tool dipped in water. Do this before the sealant starts to skin over, about 2-5 minutes.
DAP® POWER POINT® 230 acrylic latex caulk is ideal for filling and sealing gaps and cracks around window and door frames, molding, trim, baseboards, corner joints, and more. It has excellent adhesion to painted and unpainted wood, aluminum, vinyl, metal, brick, drywall, concrete and masonry.
DAP® POWER POINT® 230 is paintable in 30 minutes.
The joint size shouldn’t exceed ½” wide by ½” deep. If the joint depth exceeds ½”, insert foam backer rod material into the joint before applying the sealant.
A minimum of 12 months from the date of production in an unopened tube.
No. The product is not applicable for use in a bath or shower.
Before drying, they can be easily removed with soap and water. After the caulk has dried, it will need to be cut or scraped away.
TECHNICAL DOCUMENTS
Technical Data Sheets & Safety Data Sheets Related to This Product