POWER POINT 100 Safety Data Sheet
Safety Data Sheet
POWER POINT 100 Acrylic Latex Caulk
1 / 5
1 / 5
FEATURES & BENEFITS
Becomes paintable in approximately two hours, helping keep projects on schedule.
Formulated to help resist cracking as it cures, supporting a durable seal in interior joints and gaps.
Cures to form a waterproof seal that can help limit moisture intrusion in interior applications.
Designed with a low-odor formulation, making it suitable for use in interior spaces.
The acrylic latex formula applies evenly and tools cleanly, supporting neat joints and consistent results across a range of job conditions.
Adheres to many common building materials, including wood, drywall, plaster, most metals, most plastics, glass, brick, concrete, and mortar.
Cleanup is simple with just soap and water, minimizing waste and mess.
Meets ASTM C834 requirements for extrudability, artificial weathering, extension recovery, and slump, supporting consistent application quality.
DESCRIPTION
POWER POINT 100 acrylic latex caulk is a premium-grade sealant designed for a wide range of interior painting and finishing applications. It tools cleanly across varied climate conditions and is resistant to cracking overtime. As it cures, the formula creates a durable, waterproof seal that can help limit moisture exposure and resists mold and mildew in properly prepared joints and gaps. The caulk is easy to apply, paintable in approximately 2 hours, low in odor and cleans up with water. It is also VOC compliant and meets ASTM C834 requirements, supporting dependable application and finish quality. Adhering to many common building materials, Power Point 100 is suitable for sealing around window and door frames, molding, trim, baseboards, corner joints, and other interior gaps and cracks.
Proper Surface Preparation is Key
Remove any old caulk from the seam or joint by cutting or scraping it away. Then clean the area with soap and water to remove dirt, dust, grease or debris. Rinse thoroughly. Make sure the area to be sealed is clean and dry to ensure good adhesion.
Want straight lines?
Apply painter’s masking tape to either side of the joint before applying the sealant. Remove the tape before the sealant skins over – about 2-5 minutes. To remove, lift the edge up at a 45° angle and pull away from you.
Get a Professional-Looking Finish
To get a professional-looking finish after the sealant has been applied, smooth the bead of sealant with a caulk finishing tool dipped in water. Do this before the sealant starts to skin over, about 2-5 minutes.
DAP® POWER POINT® 100 acrylic latex caulk is ideal for filling and sealing gaps and cracks around window and door frames, molding, trim, baseboards, corner joints, and more. It has excellent adhesion to painted and unpainted wood, aluminum, vinyl, metal, brick, drywall, concrete and masonry.
DAP® POWER POINT® 100 is paintable in 2 hours.
The joint size shouldn’t exceed ½” wide by ½” deep. If the joint depth exceeds ½”, insert foam backer rod material into the joint before applying the sealant.
No. The product is not applicable for use in a bath or shower.
Before drying, they can be easily removed with soap and water. After the caulk has dried, it will need to be cut or scraped away.
A minimum of 12 months from the date of production in an unopened tube.
TECHNICAL DOCUMENTS
Technical Data Sheets & Safety Data Sheets Related to This Product