WELDWOOD NONFLAMMABLE CONTACT CEMENT Safety Data Sheet
Safety Data Sheet
WELDWOOD Nonflammable Contact Cement
1 / 2
1 / 2
FEATURES & BENEFITS
Ideal for both interior and exterior applications.
Smooth spreading and water cleanup simplify use.
Formulated with low odor for a more comfortable indoor application experience.
Creates a water resistant bond.
Apply in temperatures between 40 and 100 degrees Fahrenheit
Delivers a strong, permanent hold for outdoor carpets and artificial turf.
Meets applicable volatile organic compound (VOC) regulations and air quality standards.
DESCRIPTION
Nonflammable contact cement is designed for bonding laminates, veneers, paneling, rubber, leather, and fabric. It typically requires only one coat on most porous and non-porous substrates. The adhesive formula becomes tack-free in about 70 minutes and bonds in approximately 3 hours. Once cured, the bond is water-resistant and resists the effects of heat up to 180°F. It complies with current VOC requirements and is formulated as a nonflammable adhesive. Nonflammable contact cement is suitable for use on wood, metal, and concrete.
When using water-base d contact cements, at least one surface to be bonded must be porous. To install laminate over laminate, please refer to our Original or Gel Formula Contact Cements.
Once surfaces are joined, 25 lbs. per square inch of pressure should be evenly applied to surface starting in center and working out to edges. This is equivalent to 75 lbs. of pressure being applied to a 3-inch “J” roller. Apply as much pressure as possible, being careful not to crush/damge the materials. Insufficient pressure may allow blisters or bubbles to form later.
TECHNICAL DOCUMENTS
Technical Data Sheets & Safety Data Sheets Related to This Product