2000 SUBFLOOR Safety Data Sheet
Safety Data Sheet
D2000 Subfloor Construction Adhesive
1 / 3
1 / 3
FEATURES & BENEFITS
Subfloor construction adhesive creates a strong durable bond and prevents floor squeaks
Top applications include subfloor, wood to wood assemblies, glued floor systems and deck installation
DAP 2000 Subfloor Construction Adhesive is VOC compliant, low in odor and cleans up with water
Features a 15 minute working time
Synthetic latex adhesive creates a bond for subfloor and decking installation
Apply in temperatures between 40 and 100 degrees Fahrenheit
Install nails or screws within 15 minutes after positioning substrates in place
Allow to dry for 24 hours before exposing to heavy traffic
DESCRIPTION
2000 Subfloor Construction Adhesive is specifically formulated for subfloor and deck installation. VOC compliant adhesive that prevents floor squeaks and improves structural performance of floor assembly when used properly. 2000 Subfloor is an easy to gun adhesive that delivers a strong durable bond. Works on many surfaces including plywood, OSB, masonry, concrete, wood, treated lumber, dimensional lumber and metal. Use for subfloors, wood to wood assemblies, glued floor systems and deck installation. Interior or exterior use. Apply in temperatures between 40 degrees and 100 degrees Fahrenheit.
Uncured adhesive should be cleaned by using mineral spirits to clean up wet adhesive from surface and tools. Do not use mineral spirits to clean skin. Cured adhesive must be cut or scraped away.
Within 15 minutes, position and press substrates firmly into place. If left open longer than 15 minutes, we recommend that the partially dried (skinned) adhesive be scraped off and reapplied. Hot and dry application conditions can shorten working times, cooler and more humid application conditions can extend working times.
All of the adhesives in the DynaGrip product line are VOC compliant in all districts and states in the U.S. with the exception DynaGrip 4000 Subfloor.
Extreme temperatures and humidity may affect any adhesive’s ability to cure. The effect will differ from one product to the next, so for best results, refer to the individual product page or the product label for appropriate temperature ranges. In general, extreme cold may slow or prevent latex based adhesives from curing and will increase the force required to gun latex and some solvent-based adhesives. High humidity may slow cure time for latex-based adhesives, but will accelerate the cure time of hybrid adhesives such as DynaGrip Heavy Duty MAX.
Volatile organic compounds (VOC) means any compound of carbon, excluding carbon monoxide, carbon dioxide, carbonic acid, metallic carbides or carbonates and ammonium carbonate, which participates in atmospheric photochemical reactions, except those designated by EPA as having negligible photochemical reactivity. You can also refer to our interactive online guide for more information on VOC regulations.
Open time is the amount of time you have between applying an adhesive and the point at which you should place the two materials you’re attempting to bond together. Waiting longer than the open time provided on the product label will compromise the strength of the cured bond.
Skin time refers to the amount of time after a bead of adhesive is applied before the top layer of the bead hardens or “skins” and can no longer effectively grab a second surface.
Instant grab refers to an adhesive’s ability to instantly hold two surfaces together without falling apart. Don’t mistake instant grab for strength or cure speed—an adhesive that instantly holds two surfaces together does not necessarily have a strong bond once cured, so it’s important to look at the product specifications and Technical Data Bulletin (TDB) to evaluate whether a particular instant-grab adhesive is right for your project.
In general, latex-based adhesives can be removed with warm water and soap while still wet. Cured product must be cut or scraped away. Solvent, polyurethane & hybrid adhesives require the use of mineral spirits to clean up wet adhesive from surface and tools, taking care to follow solvent manufacturer’s precautions. Do not use mineral spirits to clean skin. Cured product must be cut or scraped away.