High performance kitchen, bath and plumbing sealant is ideal for sealing around tubs, showers, sinks, backsplashes, countertops and fixtures to keep out water and moisture. It offers 10 year mold resistance and is specially formulated with MICROBAN® Antimicrobial Product Protection to fight the growth of stain and odor-causing mold and mildew on the sealant. It is water and paint ready in
just 30 minutes, saving time. DAP 3.0 Kitchen, Bath & Plumbing Sealant won’t crack or shrink and provides
excellent adhesion and flexibility for a durable, 100% waterproof seal. Safe for granite and marble. It guns out easily and tools smoothly and is low in odor and VOC compliant, backed by a lifetime guarantee for interior use.
Apply painter’s masking tape to either side of the joint before applying the sealant. Remove the tape before the sealant skins over – about 2-5 minutes. To remove, lift the edge up at a 45° angle and pull away from you.
Gap more than 1/2" deep?
If the gap you are sealing is more than 1⁄2” deep, insert foam backer rod into the joint prior to applying the sealant. This will ensure adequate adhesion and prevent cracking.
A minimum of 12 months from the date of production in an unopened tube
Is this sealant food grade?
No. The product carries no food certifications
Can I use this product to set a drain?
No. The product is not recommended for under water applications
The sealant is water resistant in just 30 minutes; does that mean it is cured, too?
No. The product develops a water resistance quickly, but achieves a full cure over the next few days.
How do I clean Up DAP® 3.0™ High Performance Sealant?
Excess uncured DAP® 3.0™ High Performance Sealants can be cleaned up from surfaces or tools using mineral spirits. Once they have cured, any excess sealant needs to be cut or scraped away.
Is DAP® 3.0™ Kitchen & Bath Sealant safe for granite and marble?
Yes, DAP® 3.0™ Kitchen & Bath Sealant is safe for granite, marble and other natural stone surfaces and won’t cause staining.
What paints are compatible with DAP® 3.0™ High Performance Sealant?
Acrylic latex-based paints are compatible. Priming with an acrylic latex primer is necessary before painting with oil-based paints.
If I only use half of a cartridge, can I use the other half at a later date? If so, what are the proper storage conditions?
Yes. You can use the remaining product after the cartridge is opened if stored properly. The cartridge should be stored below 80°F in a dry place. When ready to use again, remove the cured material at the tip or cut the tip back to reveal fresh product.